| Showing 1-8 of 8 products found. | ||||
|
|
||||
K series Lightweight flywheel |
| Steel flywheel suitable for any 4 cylinder Rover K series engines using a PG1 gearbox. Designed to accept a 215mm clutch which we can supply if required. Supplied complete with starter ring gear. |
Price = £150.00 (excl. V.A.T.)
Price = £176.25 (incl. V.A.T. @ 17.5%) |
| Click HERE for more information and photo' |
Metro / 100 suspension individualising kit |
| This kit replaces the front to rear connecting pipe that joins the hydro units which makes each wheel independent. This allows you to make fine adjustment to each wheel for suspension height and pressure. Please note that some selected second-hand parts are used in this kit. Delivery is extra. |
Price = £60.00 (excl. V.A.T.)
Price = £70.50 (incl. V.A.T. @ 17.5%) |
| Click HERE for more information and photo' |
Metro 160hp VVC c/w PG1 gearbox |
| Supply and fit 160hp VVC engine and PG1 gearbox to Rover Metro/100 models. This conversion is more difficult due to the use of the original stronger PG1 gearbox. Extra work includes fabrication of gear change mechanism, Engine steady mount, gearbox bracket mods, downpipe etc. This conversion also includes driveshafts, MEMS3 management etc and is priced as a drive in drive out job. Non Mpi models are £75 extra. |
Price = £2,000.00 (excl. V.A.T.)
Price = £2,350.00 (incl. V.A.T. @ 17.5%) |
| Click HERE for more information and photo' |
Metro 160hp VVC c/w R65 gearbox |
| Supply and fit 160hp VVC engine and 1600 clutch/flywheel assembly to Rover Metro/100 models using customers existing gearbox.This conversion uses MEMS3 management and is priced as a drive in drive out job. Non Mpi models are £75 extra. |
Price = £1,500.00 (excl. V.A.T.)
Price = £1,762.50 (incl. V.A.T. @ 17.5%) |
| Click HERE for more information and photo' |
Metro ride height lowering |
| Your car lowered to the height to desire. Involves depressurising the suspension canisters, shortening the rods, reassembly and inflation of the suspension. |
Price = £140.00 (excl. V.A.T.)
Price = £164.50 (incl. V.A.T. @ 17.5%) |
| Click HERE for more information and photo' |
Metro suspension individualising |
| Conversion to make each suspension canister independant. Fitted price.. |
Price = £140.00 (excl. V.A.T.)
Price = £164.50 (incl. V.A.T. @ 17.5%) |
| Click HERE for more information and photo' |
Rover Parts |
| A little known fact is that we supply the kit car industry and their customers with rover based donor parts for their kits. We can locate and supply just about any second-hand rover part you may need. |
Price = £P.O.A (excl. V.A.T.)
Price = £P.O.A (incl. V.A.T. @ 17.5%) |
| Click HERE for more information and photo' |
Rover Metro / 100 Conversions |
| this section will be updated shortly but just to wet your appetite here are a few services and products that we offer for the rover metro / 100 range..... 1.8VVC engines supplied and fitted from £1200 compomotive 15" wheel and tyre package £675 300mm ap racing 4 pot brake kit £675 (must be used in conjunction with the 15" wheel above) 2.25" stainless steel exhaust system £325 'quick rack'steering rack £100 any requirement you have just call whether its a set off poly bushes or a civic type r engine transplant! pictured below is our 170hp VVC powered rover 100 with close ratio pg1 gearbox with lsd, lightweight flywheel,reyland exhaust cam, it also has the reyland stainless exhaust and mgf radiator conversion. |
Price = £1,200.00 (excl. V.A.T.)
Price = £1,410.00 (incl. V.A.T. @ 17.5%) |
| Click HERE for more information and photo' |
